男人啪啪天堂

<track id="x0jea"></track>

<p id="x0jea"><strong id="x0jea"><small id="x0jea"></small></strong></p>

  • <table id="x0jea"></table>

      <p id="x0jea"></p>
      <p id="x0jea"></p>
    1. Raw Iron Filings Dryer

      Raw Iron Filings Dryer

      Key Specifications

      Blast capacity: 350-30500m3/h

      Water evaporation capacity: 12-1000kg/h

      Installed capacity : 10-75kw

      Maximum height: 4.0-8.0m

      Application Fields:  metallurgy

      Minerals Processed

      Applicable Materials: iron filings

      • iron filings
      • iron filings

      Get the Latest Discount

      If you want to buy the product, contact us immediately, product prices will have a greater discount!

      Overview

      Raw Iron Filings Dryer Introduction

      The drum of raw iron filings dryer or iron oxide red dryer is slightly inclined cylinder can rotate, and the heat source for drying materials generally are high temperature flue gas, hot air and so on, the heat source can also be chosen according to the nature, quality requirements and other specific of materials.

      Raw Iron Filings Dryer

      Raw Iron Filings Dryer

      Raw Iron Filings Dryer

      Raw Iron Filings Dryer

      The raw iron filings dryer or iron oxide red dryer is mainly used for drying particle materials with certain humidity, such as all kinds of sand in foundry industry and dry-mixed mortar industry; clay with small particle size in building materials and cement industry; small particle size materials with no chemical changes and heat and dust resistance in chemical industry. According to different requirements on moisture content of dried materials in different industries, moisture content of dried materials can be 1-0.5%.

      Raw Iron Filings Dryer

      Raw Iron Filings Dryer Principle

      Wet material fed into the dryer from upper end, and dried material will be collected from the lower end. Hot air enters from the inlet side or discharge side and expels from the other side of the upper discharge. The tube is fitted with consequent lifting board, constantly lifts up and down in the course of cylinder rotating, making it fully contact with hot air, to increase the drying efficiency and move forward the material.

      Raw Iron Filings Dryer

      Technology Data

      Spec./m
      (Dia.×Length)
      Shell Cubage
      (m³)
      Capacity
      (t/h)
      Installation
      Obliquity
      (%)
      Highest Inlet
      Air Temperature
      (℃)
      Main Motor
      (kw)
      Weight
      (t)
      Φ1.2×8.0
      9.0
      1.9~2.4
      3~5
      700~800
      7.5
      9
      Φ1.2×10
      11.3
      2.4~3.0
      3~5
      700~800
      7.5
      11
      Φ1.5×12
      21.2
      4.5~5.7
      3~5
      700~800
      15
      18.5
      Φ1.5×14
      24.7
      5.3~6.6
      3~5
      700~800
      15
      19.7
      Φ1.5×15
      26.5
      5.7~7.1
      3~5
      700~800
      15
      20.5
      Φ1.8×12
      30.5
      6.5~8.1
      3~5
      700~800
      18.5
      21.5
      Φ1.8×14
      35.6
      7.6~9.5
      3~5
      700~800
      18.5
      23
      Φ2.2×12
      45.6
      9.7~12.2
      3~5
      700~800
      22
      33.5
      Φ2.2×14
      53.2
      11.4~14.2
      3~5
      700~800
      22
      36
      Φ2.2×16
      60.8
      13.0~16.2
      3~5
      700~800
      22
      38
      Φ2.4×14
      63.3
      13.5~16.9
      3~5
       
      700~800
      37
      45
      Φ2.4×18
      81.4
      17.4~21.7
      3~5
      700~800
      37
      49
      Φ2.4×20
      90.4
      19.3~24.1
      3~5
      700~800
      45
      54
      Φ2.4×22
      99.5
      21.2~26.5
      3~5
      700~800
      45
      58
      Φ2.6×24
      127.4
      27.2~34.0
      3~5
      700~800
      55
      73
      Φ3.0×20
      141.3
      30.1~37.7
      3~5
      700~800
      75
      85
      Φ3.0×25
      176.6
      37.7~47.1
      3~5
      700~800
      75
      95
      Φ3.2×25
      201
      42.9~53.6
      3~5
      700~800
      90
      110
      Φ3.6×28
      285
      60.8~76.0
      3~5
      700~800
      160
      135

      Technical parameters of indirect heat dryer:

        Shell 
      diameter
      ×shell 
      Length  
      Items
      Inside 
      diameter 
      of outer 
      shell
      (mm)
      Inside 
      diameter 
      of inner 
      shell
      (mm)
      Shell
       Length
      (m)
      Shell
       cubage
      (m³)
      Shell 
      obliquity
      Lifting 
      blade
       form
      Highest 
      inlet air
       temperature
      (℃)
      Dimensions
      (m)
      Φ1.5×15m 1500 500 15 20.27 3-5% Lifting form 850 16.2×2.7×2.7
      Φ1.5×17m 17 22.97 18.2×2.7×2.7
      Φ1.5×19m 19 25.68 20.0×2.9×2.9
      Φ1.8×21m 1800 650 21 35.91 3-5% Lifting form 850 22.5×2.7×2.7
      Φ1.8×23m 23 39.33 24.5×2.9×2.9
      Φ1.8×25m 25 42.75 26.5×2.9×2.9
      Φ2.2×21m 2200 800 21 58.10 3-5% Lifting form 850 ----
      Φ2.2×23m 23 63.61
      Φ2.2×25m 25 69.15

      Get Latest Price

      If you need the latest price list, please leave us a message here, thank you! We guarantee that your information will not be divulged to third parties and reply to you within 24 hours.Tell us your needs, there will be more favorable prices!

      • *
      • *

      Contact us

      China Fote Machinery Co., Ltd. Add: High and New Industrial Zone, Kexue Avenue, High and New Technology Industrial Development Zone, Zhengzhou, China.

      Phone: 0086-0371-63313738 Mobile Phone: 0086-18039114854 Email: market@sinoftm.com SiteMap: Sitemap

      Products

      Here is our best selling product.

      男人啪啪天堂
      <track id="x0jea"></track>

      <p id="x0jea"><strong id="x0jea"><small id="x0jea"></small></strong></p>

    2. <table id="x0jea"></table>

        <p id="x0jea"></p>
        <p id="x0jea"></p>